1.学術論文
■Preparation and Characterization of Polyaminophenylsilsesquioxane
Particles by Two-Step Acid-Base-Catalyzed Sol-Gel Process
K. Takahashi, K.
Tadanaga, A. Hayashi and M. Tatsumisago
Chem. Lett., 36 [2]
324-325 (2007).
■Preparation and Characterization of Glassy Materials for All-Solid-State
Lithium Secondary Batteries
A. Hayashi
J. Ceram. Soc. Jpn.,
115 [2] 110-117 (2007).
■Effects of Phenyltriethoxysilane Concentration in Starting Solutions on
Thermal Properties of Polyphenylsilsesquioxane Particles Prepared by a Two-Step
Acid-Base Catalyzed Sol-Gel Process
K. Takahashi, K. Tadanaga, A. Matsuda,
A. Hayashi and M. Tatsumisago
J. Ceram. Soc. Jpn., 115 [2]
131-135 (2007).
■Antireflective Properties of Flowerlike Alumina Thin Films on Soda-Lime
Silica Glass Substrates Prepared by the Sol-Gel Method With Hot Water Treatment
N. Yamaguchi, K. Tadanaga, A. Matsuda, T. Minami and M. Tatsumisago
Thin
Solid Films, 515, 3914-3917 (2007).
■Thermoplastic and Thermosetting Properties of Polyphenylsilsesquioxane
Particles Prepared by Two-Step Acid-Base Catalyzed Sol-Gel Process
K.
Takahashi, K. Tadanaga, A. Matsuda, A. Hayashi and M. Tatsumisago
J. Sol-Gel
Sci. Tech., 41, 217-222 (2007).
■Direct Formation of Zn-Al Layered Double Hydroxide thin Films Intercalated
with Various Organic Anions through the Sol-Gel Method with Hot Water Treatment
N. Yamaguchi, K. Tadanaga and M. Tatsumisago
Solid State Phenomena,
124-126, 635-638 (2007).
■Micropatterning for Vinylsilsesquioxane-Titania Hybrid Gel Films with
Ultraviolet Light Irradiation
A. Matsuda, R. Ogawa, Y. Daiko, K. Tadanaga
and M. Tatsumisago
J. Photopolym. Sci. Tech., 20 [1]
101-105 (2007).
■Mechanochemical Synthesis of Silver Ion Conducting Glasses in the
System AgI-Ag2O-B2O3
A. Hayashi, T. Ishida, T. Minami and M. Tatsumisago
Glass Technology: Eur. J. Glass Sci. Tech. Part A 48 [1]
1-5 (2007).
■Electrochemical Properties and Local Structure of Tin Borate Glasses for
Lithium Secondary Batteries
M. Tatsumisago and A. Hayashi
Glass
Technology: Eur. J. Glass Sci. Tech. Part A 48 [1] 6-12 (2007).
■Inorganic-organic Hybrid Membranes Prepared from
3-Aminopropyltriethoxysilane and Sulfuric Acid as Anhydrous Proton Conductors
T. Tezuka, K. Tadanaga, A. Hayashi and M. Tatsumisago
Solid State
Ionics, 178, 705-708 (2007).
■Characterization of Proton-conductive SiO2-H3PW12O40 Composites Prepared by
Mechanochemical Treatment
A. Matsuda, Y. Daiko, T. Ishida and M. Tatsumisago
Solid State Ionics, 178, 709-712 (2007).
■Lithium Ion Conductivity of the Li2S-P2S5 Glass-Based Electrolytes Prepared
by the Melt Quenching Method
K. Minami, F. Mizuno, A. Hayashi and M.
Tatsumisago
Solid State Ionics, 178, 837-841 (2007).
■Crystal Structure of a Superionic Conductor, Li7P3S11
H. Yamane,
M. Shibata, Y. Shimane, T. Junke, Y. Seino, S. Adams, K. Minami, A. Hayashi and
M. Tatsumisago
Solid State Ionics, 178, 1163-1167 (2007).
■Direct Formation of Mg-Al-Layered Double-Hydroxide Films on Glass Substrate
by the Sol-Gel Method with Hot Water Treatment
N. Yamaguchi, D. Ando, K.
Tadanaga and M. Tatsumisago
J. Am. Ceram. Soc., 90 [6]
1940-1942 (2007).
■Mechanochemical Synthesis and Li+ Ion Conductivity of Li3N-based Amorphous
Solid Electrolytes
A. Hayashi, T. Ohtomo, F. Mizuno and M. Tatsumisago
Chem. Sustainable Development, 15, 163-167 (2007).
■Mechanochemical Synthesis of Fast Lithium Ion Conducting Solid Electrolytes
in the Li2S-P2S5-SiS2-Al2S3 System
Y. Shibutani, F. Mizuno, A. Hayashi, and
M. Tatsumisago
Chem. Sustainable Development, 15, 219-223
(2007).
■Mechanochemical Synthesis of Proton Conductive M3H(SO4)2 (M=Na,K, Rb)
Crystatls
T. Tezuka, Y. Yamashita, A. Hayashi, K, Tadanaga and M.
Tatsumisago
Chem. Sustainable Development, 15, 237-241
(2007).
■Fabrication of Convex-Shaped Polybenzylsilsesquioxane Micropatterns by the
Electrophoretic Sol-Gel Deposition Process Using Indium Tin Oxide Substrates
with a Hydrophobic-Hydrophilic-Patterned Surface
K. Takahashi, K. Tadanaga,
A. Matsuda, A. Hayashi and M. Tatsumisago
J. Sol-Gel Sci.
Tech.,43, 85-91 (2007).
■Preparation of α-Fe2O3 Electrode Materials Via Solution Process and Their
Electrochemical Properties in All-Solid-State Lithium Batteries
H. Kitaura,
K. Takahashi, F. Mizuno, A. Hayashi, K. Tadanaga M. Tatsumisago
J.
Electrochem. Soc., 154 [7] 725-729 (2007).
■Structure of Polyphenylsilsesquioxane Particles Prepared by Two-Step
Acid-Base Catalyzed Sol-Gel Process and Formation of Hollow Particles
K.
Takahashi, K. Tadanaga, A. Hayashi, A. Matsuda, K. Katagiri and M. Tatsumisago
J. Nanosci. Nanotechnol., 7 [9] 3307-3312 (2007).
2.解説，総説
■硫化物系ガラスセラミック電解質を用いた全固体リチウム二次電池の開発
辰巳砂昌弘・林 晃敏
電池技術、19, 104-114 (2007).
■中温作動型燃料電池にむけた無機非晶質電解質材料の開発
辰巳砂昌弘・忠永清治
水素エネルギーシステム、32 [2] 11-15 (2007).
■エアロゲルの作製と特性
忠永清治
成形加工、19 [12] 738-741 (2007).
3.学術著書
■環境調和型材料シリーズ「燃料電池材料」
辰巳砂昌弘（分担執筆）
「無機−有機ハイブリッド電解質とガラス電解質」93-99,
(社)日本セラミックス協会［編］、日刊工業新聞社 (2007).
■現代無機材料科学（編著：足立吟也、南 努）
辰巳砂昌弘（分担執筆）
「光通信材料 −ブロードバンド時代を支える」75-89, 化学同人
(2007).
忠永清治（分担執筆）
「燃料電池」114-124, 化学同人 (2007).
■全固体二次電池の開発 ―高性能化と製造技術―
辰巳砂昌弘・林 晃敏（分担執筆）
「固体電解質における高イオン伝導化技術動向」213-223, サイエンス&テクノロジー (2007).
辰巳砂昌弘・林 晃敏（分担執筆）
「粉体技術による全固体電池の作製」295-308, サイエンス&テクノロジー (2007).
■ ねれと(超)撥水、(超)親水技術、そのコントロール ―実用化および表面処理・試験評価・商品展開―
忠永清治（分担執筆）
「ゾル−ゲル法による撥水−親水パターンの形成と応用」316-322, 技術情報協会 (2007).
■ ゾル−ゲル法および有機−無機ハイブリッド材料 ―構造制御・高性能化とその応用―
忠永清治・辰巳砂昌弘（分担執筆）
「電気泳動電着法による透明厚膜の作製」156-161, 技術情報協会 (2007).
辰巳砂昌弘・忠永清治（分担執筆）
「無機−有機ハイブリッドおよびコンポジット電解質の作製」309-317, 技術情報協会 (2007).